Customized HXE-28DWT Copper wire drawing machine with annealer
I. Quick details
HXE-28DWT is used to draw and annealing single bare copper wire
from 1.1-1.6mm to 0.1-0.32mm.
II. Main Technical parameters
1. Usage: Copper wire drawing and annealing
2. Inlet diameter: 1.1-1.6mm
3. Outlet diameter: 0.1-0.32mm
4. Max. mechanical speed: 1500m/min.
5. Dies: 28 dies
6. Slip ratio: 13%, Finished capstan slip ratio: 8%
7. Main motor: AC 3 Phase 18.5KW, Inverter control
8. Take up motor: AC 3 Phase 3.7KW, Inverter control
9. Take up capacity: 50kg for diameter 300mm iron spool (Customize)
10. Spool size: Diameter 300mm/Max (Customize)
11. Capstans: Ceramic plasma, Drawing capstan 316mm, Final capstan
12. Capstan lubrication: Water pipe spray
13. Traversing: 110W synchronous motor,transmission by timing
14. Brake: 20KG-M Electromagnetic brake
15. Air pressure: 4-6kg/cm2
16. Annealing pulley: Diameter 120mm
17. Annealing volt: 50V
18. Annealing current: 300A
19. Annealing motor power: 15KVA
20. Power source: (customize)
21. Tension control: Annealer & Spooler Tension control by
Swing arms, Air pressure auto adjust.
22. Tension control: Weight balance
23. Machine dimension(L*W*H): 3500mm*1600mm*2500mm, Machine
|1. Pay-off stands||1 set|
|2. HXE-28DWT main drawing machine||1 set|
|3. Electrical control system||1 set|
|4. Steam generator||1 set|
|5. Lubrication tank and Pump||Optional|
|6. Spare parts|
IV. Working environment
4-1.Altitude less than 1000m.
4-3.Relative temperature less than 85% (25℃)
4-4.Power source 380V, 50Hz, can be customized
4-5.Air capacity 0.3m³/min
V. Advantage and after-sale service
(A1). HENGXIE has some world famous parts suppliers, has special
lubrication system for the gears and bearing.
(A2). Body and other key components and parts are produced by our
own factory , quality is reliable.
(A3). DC. three-section annealing
(A4). Our company’s developing process in more than 10 years.
B: After-sale service
Our company for all machine product, since the shipment date, our
company free after sale maintenance service guarantee period is:
(B1) 1 year for mechanical part.
(B2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take
responsibility, but if the Buyer agree, will charge fees
accordingly to repair the machine.
1. Due to wrong operation while shipping.
2. Due to Buyer`s wrong preparation that may cause damage to the
3. Due to Buyer`s wrong operation that may cause damage to the
4. Not in the consuming part list.
5. After agreement are made for the shipping, for any damage, Buyer
should inform Seller in letter form to repair in seven days, If
beyond the dare, Seller shall take no responsibility.
6. For any other failures due to acts of God (such as lightning,
typhoon, earthquake, riots, war, fire or flood) and other factors
that will cause damage, Seller shall take no responsibility.
7. Seller guarantee provide long term support regarding the parts
and teach. After warranty, will charge accordingly.