0.6mm-1.2mm HXE-24DW Fine copper wire drawing machine
I. Quick description
24DW Fine copper wire drawing machine is used to drawing copper
wire from 0.6mm-1.2mm to 0.08mm-0.5mm.
|1. Pay-off shelf||1 set|
|2. HXE-24DW Fine copper wire drawing machine||1 set|
|3. Bobbin Unloading device||1 set|
|4. Spare parts||As per List|
|5. Operation manual|
1. Inlet wire diameter: 0.6mm-1.2mm
2. Outlet wire diameter: 0.08mm-0.5mm
3. Speed: 2500mpm, Capacity: 0.2mm, 30kg/h; 0.3mm, 37kg/h; 0.4mm,
46kg/h; 0.5mm, 52kg/h.
4. Dies number: 24
5. Slip ratio (Area reduction) : 13%+ 8%
6. Wire drawing mode: horizontal-mode and 4 axes
7. Driver: by dual Inverters control, Brand: Inovance,Chinese
famous brand, 15kw+3.7kw.
8. Main motor: 15KW AC 3 phase motor
9. Spooler motor: 3.7KW AC 3 phase motor
10. Motor brand: Wan Nan motor, China classical brand
11. Capstan: Ceramic plasma
12. Max capstan diameter: 242mm
13. Max fix speed capstan: 207mm
14. Machine structure: Cast iron
15. Reverse system: PID synchronous control spool
16. Transmission: Flat belts
17. Pay-off method: Over-head
18. Tension control: Weight balance by swing arm
19. Lubrication type: spray, Grade 2.5%-3%, Capacity 40L/min,
20. Bobbin size: 300mm, material steel, 17kg.
21. Take up: Shaft type
22. Bobbin capacity: 50-60kg/max
23. Brake: Magnetic brake
24. Power source: Customize
25. Machine dimension: L2550mm*W1600mm*H1590mm, Machine weight:
IV. Advantage and after-sale service
(1). HENGXIE has some world famous parts suppliers, has special
lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our
own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.
B: After-sale service
Our company for all machine product, since the shipment date, our
company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.
Under these situation mentioned, the Seller will not take
responsibility, but if the Buyer agree, will charge fees
accordingly to repair the machine.
1. Due to wrong operation while shipping.
2. Due to Buyer`s wrong preparation that may cause damage to the
3. Due to Buyer`s wrong operation that may cause damage to the
4. Not in the consuming part list.
5. After agreement are made for the shipping, for any damage, Buyer
should inform Seller in letter form to repair in seven days, If
beyond the dare, Seller shall take no responsibility.
For any other failures due to acts of God (such as lightning,
typhoon, earthquake, riots, war, fire or flood) and other factors
that will cause damage, Seller shall take no responsibility.
6. Seller guarantee provide long term support regarding the parts
and teach. After warranty, will charge accordingly.
V. Common trouble solve method
1. After shut down the machine, need at least 30 seconds to restart
2. Wire often breaks, adjust the speed, balance arm, check the dies
are clean or not.
Before open the machine, make the balance arm at the lowest
position, and in running, the balance arm should be in the
horizontal line. No big shake, no up and down frequently.
3. If the wire sticks to the capstan, use Alcohol to clean the
4. Pay-off shelf doesn`t work well, change the position of the
5. Has nick on the wire, check the capstans on the Take-up part.
Check the drawing capstans.
The machine should be installed in the flat clean, well-ventilated
ground, shock-absorbing rubber block on the base of the machine,
placed by horizontal correction.
Use the foundation screws to fix the four sides of the machine on
the ground to ensure that the machine is in operation, no vibrate.
Electrical control box RST terminal for the external power cord,
ground wire terminal must be grounded.