Brand Name : HXE
Model Number : SX630
Certification : ISO/SGS
Place of Origin : China(Mainland)
MOQ : 1 set
Price : Negotiable
Payment Terms : T/T, L/C
Supply Ability : 40 sets per year
Delivery Time : 45-60 work days
Packaging Details : Packed with plastic film, U-steel under the machine. 20GP Container.
Usage : wire take up
Wire diameter : 1.7mm-4.2mm
suitable material : copper/aluminium
Max speed : 25m/s
Max capacity : 500kg
Spooler motor : 15kw*2sets
Product name : Wire take up machine
After-sale service : Engineer available to overseas
HXE- High Speed SX 630 Copper Wire Take Up Machine
I. Application
High Speed SX630 Copper wire take up machine with control system is used to take up wire from 1.7mm-4.2mm.
II. Attention
2-1. If wire breaks, will stop automatically, and the Fault Indicator light will open.
After connect the wire, press the Fault Reset button(Yellow button) and the On button (Green button), to run the machine again.
2-2. Press Emergency Stop button(Red button) to shut down the machine immediately.
After solve, press the button again to run the machine.
2-3. After set the Length-counter, the machine will stop automatically when reach the length set.
After change the Spool, please press the Length Reset button(Yellow button) and the Spool Reset button(Yellow button) to run the machine again.
2-4. After the machine stop(no running at all), then switch the Pump switch to stop the lubrication.
2-5. Do not touch the wire in the Annealing section.
2-6. After shut down the machine, need at least 30 seconds to restart the machine.
2-7. Wire often breaks, adjust the speed, balance arm, check the dies are clean or not.
2-8. If has scratch on the surface of the wire, check the capstans on the Take-up part. Check the drawing capstans.
III. Main technical parameter
1. Applicable wire diameter 1.7mm-4.2mm
2. Max speed 25m/s
3. Max loading capacity 500kg
4. Max length for wire storage 17m
5. Spooler motor power 15kw*2sets (WN motor, China classic brand)
6. Traverse motor power 90w
7. Glide base motor power 0.75kw
8. Control system Dual inverters control system (Inovance brand, China classic brand)
9. Brake Disc brake
10. Wire capture coefficient ≥95%
11. Compressed air capacity 0.4-0.6Mpa, 50L/min
12. Dimension (L*W*H) 3350*3000*2200mm
13. Weight 5300kg
IV. Working environment
Altitude less than 1000m.
Temperature: -10℃-40℃
Relative temperature less than 85% (25℃)
Power source 380V, 50Hz, can be customized
V. Machine maintenance and precautions
1. Make sure the machine and the capstans clean, no scrap, no break wire.
2. Make sure the Take-up part clean.
3. Electrical cabinet should be closed.
4. Change belts if worn out.
5. Only qualified electrical technician can repair the electrical part.
6. Never change the Inverter parameter.
7. If something wrong with the machine that can`t solve, please contact the supplier first.
Do not open the machine without consulting to the supplier.
8. Put lubrication oil to the parts regularly, to make sure all parts running fluently. After running 1000 hours, clean all the bearings.
9. Annealed nickel belt and Annealing carbon brush are consuming parts. If spark happens a lot on the annealing capstans, then should change the nickel belt. If the carbon is going to run out, then need to change a new set.
Industrial Wire Take Up Machine With Automatic Bobbin Change Power Source Customized Images |
Friendly Links: www.everychina.com
Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们