Quick die change HXE-400/13DL Copper rod breakdown machine with annealing machine
HXE-400/13DL Copper rod breakdown machine with annealing machine is
used to draw and anneal single bare copper wire from 8mm to
1.2mm-3.5mm.The drawing capstans are arranged in a line that are
able to work continuously with drawing speed and electrical control
can be matched with each other.
II. Compositions of equipment
|1. Pay-off shelf||1|
|2. HXE-400/13DL Main drawing machine||1|
|3. HXE-TH450 Annealing machine||1|
|4. HXE-180 Tension controller||1|
|5. HXE-SX500/630 Double spoolers||1|
|6. HXE-WF750 Coiler & Basket changer system||1|
|7. Electrical cabinet||1|
|8. Gear Oil Cooler and Pump||2|
|9. Operation panel / With PLC&Touching screen||1|
|10. Spare parts|
III. Main technical parameters
|3. Diameter of capstans||400mm|
|4. Speed||1000m/min, Capacity say 1.2mm, 600kg per hour|
|5. Slip ratio||1.238|
|6. Quantity of capstan||13|
|7. Capstan||Tungsten carbide|
|8. Quick dies change||Available|
|9. Main motor||DC 200KW|
|10. Fix speed motor||DC 55KW|
|11. Gear||Not Changeable|
|12. Noises of machine||≤85 db|
|13. Protection cover||Installed|
|14. Lubrication system||1 set|
IV. The structure and principle of the machine
4-1. The annealing part, is three-section annealing, consist of
Preheating section, annealing section and drying section. The fix
speed capstan of drawing, the annealing capstans, are driven by the
same motor, through belts, so the speed of drawing, speed of
annealing, is the same, make sure no wire break.
4-2. The annealing capstans, are access to positive and negative
power, make the wire pass through the annealing capstans with
current, by short-circuiting, to preheat, anneal and dry.
4-3. The annealing current and voltage, by auto tracking the
drawing speed to auto adjust.
4-4. To cooling fast to achieve the annealing, the annealing
capstan is under the cooling water. There is a cooling tank at the
bottom of the machine, cooling water, better use fat content of
0.5% emulsion. The pump shall pump the cooling water through the
pipe and the switch to the annealing door. Adjust the cooling water
switch to make sure the water is in certain height.
4-5. To make sure the wire while annealing, no Oxidation, there is
a steam-in protection pipe, connect the pipe to the Steam
generator, to use the steam to protect the wire from the oxidation.
4-6. In the exit of the drying section, there is a blowing device.
In the device, shall have two dies. Connect the air compressor to
the air compress input pipe, then out by the blowing device, adjust
the switch, to make all the left water of the drying part, on the
surface of the wire, blow away.
V. Advantage and after-self service
(1). HENGXIE has some world famous parts suppliers, has special
lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our
own factory , quality is reliable.
(3). DC. three-section annealing
(4). Our company’s developing process in more than 10 years.
B: After-self service
Our company for all machine product, since the shipment date, our
company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.