Sign In | Join Free | My entremaqueros.com
China Suzhou Hengxie Machinery Co., Ltd logo
Suzhou Hengxie Machinery Co., Ltd
Suzhou Hengxie Machinery Co., Ltd
Active Member

6 Years

Home > Intermediate Wire Drawing Machine >

13DT Intermediate Wire Drawing Machine , Copper Wire Drawing Machine With Annealer

Suzhou Hengxie Machinery Co., Ltd

13DT Intermediate Wire Drawing Machine , Copper Wire Drawing Machine With Annealer

Brand Name : HXE

Model Number : 13DT

Certification : ISO , SGS

Place of Origin : China(Mainland)

MOQ : 1 set

Price : Negotiable

Payment Terms : T/T, L/C

Supply Ability : 20 sets per year

Delivery Time : 70-90 work days

Packaging Details : Packed with plastic film, U-steel under the machine. 40HQ Container

Usage : Drawing and annealing

Inlet diameter : 3.0mm-3.5mm

Outlet diameter : 0.8mm-2.8mm

Main motor : 45KW

Max line speed : 1000mpm

Power source : 380V/50-60Hz

After-sale service : Engineer Available to Overseas

Product name : Intermediate wire drawing machine

Contact Now

HXE-13DT Medium copper wire drawing machine with annealer

I. Application

Medium copper wire drawing machine with annealer is used to drawing and annealing single bare copper wire from 3.0mm-3.5mm to 0.8mm-2.8mm

II. Composition

1. Pay-off shelf

2. HXE-13DT Copper wire drawing machine
3. HXE-TH350 Annealing machine
4. HXE-180 Tension controller
5. HXE-SX630 Double spooler
7. Operation panel
8. Drawing control cabinet
9. Annealing control cabinet

III. Main technical parameters

Machine type HXE-9DT HXE-13DT
Control system Traditional analog type/digital control with production record
Outlet diameter(mm) 1.0-2.8 0.8-2.8
Inlet diameter(mm) 3.0-3.5 3.0-3.5
Max.line speed 900 1000
Die number 9 13
Slip ratio 19.6%+16.4%
Frame Welded by steel plate
Capstan Tungsten
Max capstan diameter 280mm
Fix speed capstan diameter 280mm
Spooler bobbin size 400-630mm
Bobbin loading&unloading type Double end thimbles
Max.loading capacity 500KG/MAX
Annealing method DC.Three-section annealing
Main motor AC45KW
Spool motor AC11KW*2
Max.annealing current DC3000A
Max.annealing voltage DC60V
Annealing power 180KVA
Steam quantity 18kg/h
Cooling water capacity 650L/min
Compressed air capacity 0.4~0.6Mpa,50L/min
Power source 380V 50/60HZ
Dimension 13300*3500*3400
Weight 8500KG 8500KG

IV. Attention

4-1. If wire breaks, will stop automatically, and the Fault Indicator light will open.

After connect the wire, press the Fault Reset button(Yellow button) and the On button (Green button), to run the machine again.

4-2. Press Emergency Stop button(Red button) to shut down the machine immediately.

After solve, press the button again to run the machine.

4-3. After set the Length-counter, the machine will stop automatically when reach the length set.

After change the Spool, please press the Length Reset button(Yellow button) and the Spool Reset button(Yellow button) to run the machine again.

4-4. After the machine stop(no running at all), then switch the Pump switch to stop the lubrication.

4-5. Do not touch the wire in the Annealing section.

4-6. After shut down the machine, need at least 30 seconds to restart the machine.

4-7. Wire often breaks, adjust the speed, balance arm, check the dies are clean or not.

4-8. If has scratch on the surface of the wire, check the capstans on the Take-up part. Check the drawing capstans.

V. Machine maintenance and precautions

1. Make sure the machine and the capstans clean, no scrap, no break wire.

2. Make sure the Take-up part clean.

3. Electrical cabinet should be closed.

4. Change belts if worn out.

5. Only qualified electrical technician can repair the electrical part.

6. Never change the Inverter parameter.

7. If something wrong with the machine that can`t solve, please contact the supplier first.

Do not open the machine without consulting to the supplier.

8. Put lubrication oil to the parts regularly, to make sure all parts running fluently. After running 1000 hours, clean all the bearings.

9. Annealed nickel belt and Annealing carbon brush are consuming parts. If spark happens a lot on the annealing capstans, then should change the nickel belt. If the carbon is going to run out, then need to change a new set.

13DT Intermediate Wire Drawing Machine , Copper Wire Drawing Machine With Annealer


Product Tags:

pulley wire drawing machine

      

medium wire drawing machine

      
 13DT Intermediate Wire Drawing Machine , Copper Wire Drawing Machine With Annealer Manufactures

13DT Intermediate Wire Drawing Machine , Copper Wire Drawing Machine With Annealer Images

Inquiry Cart 0
Send your message to this supplier
 
*From:
*To: Suzhou Hengxie Machinery Co., Ltd
*Subject:
*Message:
Characters Remaining: (0/3000)
 

Friendly Links: www.everychina.com

Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

Copyright © 2009 - 2024 entremaqueros.com. All rights reserved.